Requirements Product Specification/mm Yb:YAG 2×2×10 mm Yb:YAG 2×2×12 mm Process Indicators Yb:YAG crystal Size: 2×2×10 mm, 2×2×12 mm Coating: Side 1: [email protected]+940nm Side 2: [email protected]+940nm Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance: ±0.1 mm Surface Flatness: <λ/[email protected] Wavefront Distortion (WFD): <λ/[email protected] Surface Quality : 40/20 Parallel: 30〞 Perpendicular: 15ˊ Clear Aperture: >90% Chamfer: <0.2×45° […]
Nd:YVO4 crystal case (6) – 2×2×4 mm for 1064 nm laser
Requirements Product Specification/mm Nd:YVO4 2×2×4 mm Process Indicators Nd:YVO4 crystal a-cut Flat/Flat faces, no intentional tilt of the faces Uncoated Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance: ±0.1 mm Surface Flatness: <λ/[email protected] Wavefront Distortion(WFD): <λ/[email protected] Surface Quality : 40/20 Parallel: 30〞 Perpendicular: 15ˊ Clear Aperture: >90% Chamfer: <0.2×45° Pictures
BBO crystal case (10) – 6×6×6 | 6×6×9 mm for SHG
Requirements Product Specification/mm BBO 6×6×6 mm BBO 6×6×9 mm Process Indicators BBO crystalsSHG eoe 744 nm → 372 nmSize: 6*6*6mmTheta degree=46°, Phi degree=30°Coating: S1&S2: AR/[email protected]+372 nm BBO crystalsSHG eoe 744 nm + 372 nm → 248 nmSize: 6*6*9mmTheta degree=62.6°, Phi degree=30°Coating: S1: [email protected]+372nm, S2: [email protected] Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance: ±0.1 mm Surface Flatness: […]
Nd:YVO4 crystal case (5) – 3×3×5 mm for 1064 nm laser
Requirements Product Specification/mm Nd:YVO4 3×3×5 mm Process Indicators Nd3+:YVO4 crystals 3 mm × 3 mm aperture 5-mm long a-cut Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance: ±0.1 mm Surface Flatness: <λ/[email protected] Wavefront Distortion(WFD): <λ/[email protected] Surface Quality: 20/10 Parallel: 30〞 Perpendicular: 15ˊ Clear Aperture: >90% Chamfer: <0.2×45° S1&S2: [email protected] 808 nm @ 1064 nm Pictures
TGG crystal case (4) – Ø2×5 | Ø2×10 mm
Requirements Product Specification/mm TGG Ø2×5 mm TGG Ø2×10 mm Process Indicators Diameter:2 mm, length:5, 10 mm Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance:±0.1 mm 2-side polishing on end face Uncoated Surface Flatness: <λ/[email protected] Wavefront Distortion(WFD) : <λ/[email protected] Surface Quality : 10/5 Parallel: 30〞 Perpendicular: 15ˊ Clear Aperture: >90% Chammfer: <0.2×45° Pictures
CeF3 crystal case (1) – φ5×5 mm
Requirements Product Specification/mm CeF3 Φ5×5 mm Process Indicators CeF3 Size: Dia 5mm;5mm long Polish:the two flat faces polished Orientation Tolerence: < 0.5° Thickness/Diameter Tolerance: ±0.1 mm Surface Flatness: <λ/[email protected] Wavefront Distortion(WFD): <λ/[email protected] Surface Quality: 20/10 Parallel: 30〞 Perpendicular: 15ˊ Clear Aperture: >90% Chammfer: <0.2×45° Pictures